New and used food processing, packaging & materials handling machinery
      +61 3 9791 7011

Australian Made Bin Lifter

This meat tub hoist was used in a food plant lifting standard sized tubs (not included) Discharge Height 2900 Motor Details: 0.75Kw, 1495rpm, 240v, I.P.55, Gearbox ratio: 39:61, ...

HANAKI Bowl Cutter (s/s) with offloader and control panel

This fully stainless steel 200L silent cutter is in excellent condition.It can be used to cut meat or other food products into a coarse or very fine emulsified type mix. It is fitted with 6 cutting knives and an unloader. The bowl is driven by a 37kW motor as well as a 0.5kW motor which drives the offloading arm. Bowl inside diameter: 1270mm Bowl outside Diameter: 1360mm THIS MACHINE CO...

COZZINI Compact Posi-Feed Emulsion/Reduction System

This COZZINI Emulsion/Reduction System is used mainly in the MEAT PROCESSING industry for sausages, salamis, * Info from Cozzini Website: Cozzini's Compact Posi-Feed (CPF) emulsion/ reduction unit assures the same consistent quality and throughput as Cozzini's well known VS and CS Series emulsion /reduction systems. The CPF fits directly under the discharge of a mixer/blender or bowl chopper....

RISCO Filler with LOMA Metal Detector and bin lifter

This RISCO RS 5001 FL filler is fitted with a LOMA Metal Detector and bin lifter.Bins are available at extra cost if still available. Main Features High production and quick portioning system Optimized filling process Suitable for connection with clipping machines Technical Features Production per hour: Portioning speed : 700 pcs / min ( NOMINAL ONLY. TO BE TESTED ON YOUR PRODUCT FOR CORR...

Koppens GEA CFS Former with Battering plus Crumbing/Breading Machine

This is a complete KOPPENS line consisting of 3 machines which work together as a line. 1) The Former/Moulder/Portioning Machine portions, forms and moulds, hamburgers, rissoles etc. 2) The Battering machine . 3)The Crumbing or Breading Machine The KOPPENS VM400HSE screw feed former and portioning system is used for a wide variety of product forming such as red meat, pork, poultry, veal...

GMC HYDRAUFLAKER Frozen Block Meat Flaker

The unit is intended to slice or shred frozen blocks of meat. The block feeder is powered by a hydraulic pump connected to a hydraulic motor which is chain coupled to the table pusher assembly. The cutting rotor is powered by a 7.5 KW, 1440 RPM, 415V AC, 3 Phase, TEFC Electric motor belt coupled to the cutting rotor. Table height above floor - 1130mm Discharge height above floor - 620mm (Would ...

REISER Frozen Meat Breaker

- Maintains Product Texture The RotoClaw II breaks up hard frozen meat blocks without destroying the texture of the product. Its slow-speed rotor produces small pieces without aggravating noise. - Produces a Variety of Piece Sizes. Piece size can be varied by using different rotors to satisfy most processing requirements. - Handles Large Frozen Blocks The RotoClaw II will handle frozen blocks ...

CFS WOLFKING Meat Pump

The CFS WOLFKING VanePump is a positive displacement pump with radially moving vanes. It is designed for all-round pumping applications such as ground meat and trimmings, emulsions and pre-blends, dairy products, dough and vegetables...

PACIFIC Mincer 150mm ID (s/s contacts) with Bin Lifter

This unit came together with a galvanised bin lifter with a s/s MACKIES Bin.It is fitted with a large hopper. The mincer was used to mince fruit.Currently fitted with a 4mm final grind plate. Mincer Description Model TC52 Crating Dimensions including hopper(mm): 2272mm W x 2200mm W Throughput 1500 Kg Hour nominal (product and size dependent) Weight 438 Kgs The PACIFIC 150mm Mincer Grinder i...

ENVIRO-PAK Smokehouse

Micro Processor / MP-1000 Series Normally has 2 wheel in/out trolleys per cycle, with steam and elec connections. Trolleys are not available. Electrics: 415V, 3phase, 50Hz, 58A, 27kW. Has 2 x motors - a 3HP and a 2 HP 1438RPM. Steam 100Llbs @15psi Good Condition. Single large front door, no read door. Overall Dimensions 91 1/2” L x 50” W x 96” Tall (2320mm L x 1270mm W x 2438mm ...

RISCO Vacuum Filler with lifter (stuffer)

This Risco RS 5000 Vacuum Filler with lifter was used in the Dairy industry on blended cheeses. Hopper Capacity: 350L Speed: 420 portions per minute ( PRODUCT & PORTION DEPENDENT -nominal only - your product to be tested ) Weight: 1220Kg, The old controls have been taken out and the machine has been refurbished with a new touchscreen and PLC Dimensions: 2440mm x 1190mm x 2010mm...