New and used food processing, packaging & materials handling machinery
+61 3 9791 7011
Drop Through metal Detector Previously a part of Carlson Blending state. Unit is mobile on lockable castors Make: LOMA Model: IQ2 Serial Number: C600049 Frame height: 1440mm Hanger hooks: 1540mm Discharge height: 1400 (1273 with tube insert) Infeed height: 1644mm ( 1690 mm with tube insert) Frame dimensions: 1490mm X 1325mm X 1440mm H
Anritsu Metal Detector with Reject Bin Indicator: KD3101AW Detection head: KD1113AW Electrics: 1ph, 240V, 50Hz Product Weight: Max 5 Kg Product Size: 220 W x 80 H mm Detection: Fe 1.5mm , SUS 2.5mm Aperture: 297mm W X 82mm H X 169mm deep Detection belt: 210mm W X 770mm C2C Reject Belt: 250mm W X 675mm C2C Working height: 803mm
Anritsu Metal Detector with Reject Bin Indicator: KD3103AW Detector: KD1113BW SN: 4600101862 Product Weight: Max 5 Kg Product Size: 250 W x 80 H mm Electrics: 1ph, 240V, 50Hz Aperture: 300mm W X 83mm H X 207mm deep Working height : 820mm Detection belt: 220mm W X 780mm C2C Reject Belt: 250mm W X 665mm C2C
Loma IQ2 drop through metal detector with reject and bulk bag chute arm Serial No: 20789 Metal detector ID: 173mm Non metallic Insert chute: 132mm ID, 915mm tall Total length (indeed to Discharge): 1100mm Reject mechanism made by heat and control Model: MD Cowbell Serial: 110788 16/8/00 -Was part of FILL23228S Bulk Bag Filling System
The QDF is a high-performance Metal Detector suitable for detecting ferrous and Nor-ferrous metallic contamination in a wide range of food or other products. The QDF consists of an Aluminium constructed detecting head with full surround triple coil system filled with a Non-shrink Urethane resin for complete sealing. The system operates using analog main controls with digital pulse phase modulation
Mobile metal detector on castors System square controller Waterproof head Direction Left to Right Aperture Size: 600 W x 350 H mm x 295mm deep Conveyor Size: 1,400 L (C2C) x 500 W mm Sensitivity: 1.2mm Fe and 2.0mm SUS Belt speed: 24m/50Hz Working height: 600mm off ground Electrics: 1ph, 220V, 50Hz Ishida Model: ISD-6035-WP Job No: 04/ 16126 Serial: 62356 DOM: 03/2005 Operators manual supp
Product Weight: Max 50 Kg Product Size: 550 W x 250 H mm
Compact AND Metal Detector Aperture Size: 350 W x 100 H mm Effective Size: 250 W x 80 H mm Conveyor Length: 800 mm Conveyor width: 250mm Conveyor Belt Speed: 10-60 m/min Current working height: 670mm ( without feet) Working height can be adjusted using the threaded feet. Water Resistance: IP65 Compliant Electrics: 1ph, 220V, 50Hz
Belt length: 770mm Belt width: 220mm Belt height: 700mm 1~, 220V system Product Weight: Max 5Kg Product Size: 220 W x 80 H mm Max Passing Size: 300 W x 80 H mm Preset Memory: Max 100 Belt Speed: 10 - 90 m/min Protection Class: IP30
Features: Includes control box that houses all the wiring Make: Mettler Toledo Model: Safeline Metal detection Aperture: 350mm L x 170mm H x 330mm deep Electrics: 100-240VAC, 50/60Hz, 340W max. Head only dimensions: 900mm L x 350mm W x 450mm H
The Thermo Scientific EZx is a conveyorized X-ray system designed to look and work more like a metal detector than a complex X-ray system. It utilizes a unique wrap around detector that assures there are never any “blind spots” in the inspection tunnel. The exceptionally reliable, wide beam X-ray source can easily penetrate most packaged foods without any trouble. The EZx contaminant detection sys
Anritsu vertical model is suitable for tall products in containers, such as beverages and seasonings in glass and plastic bottles. - Max Product Weight: 5Kg - Product Size: 80 W x 280 H mm - Temp: 0-40 degree Celsius - Power: 100 VAC-240VAC - 1~ 1510VA 50/60Hz - Aperture: 100mm W x 280mm H x 170mm deep - Rejecter type: High pressure pneumatic blower - VSD for speed control: Keyence Hyb
Aperture size; 350 mm wide, 650 mm high. SCADA protocols Modbus RTU via RS-485, and an RS-232 interface. Scanning speed range from 1 m/min (3.1 ft/min) up to a maximum of 350 m/min (1000 ft/min) (dependent on configuration). Note: They are pulled apart and need to be reassembled. Metal Detector Unit Full Stainless Steel Construction on 4 hard stand Dimensions: 370mm (L) x 700mm (W)
Stainless steel frame with emergency stop button and bell alarm. Electrics: 1~, 240VAC, 50hz, 3 pin plug Metal Detector: - S/N: 21272 - CAP: 100VA - Input: 100V, 1~ - TYP: MP2-400A - Detector Unit: B250 , S/N 318 Detection Coil: - B type - Opposing type - High frequency type - Best for dry product - Splt-off to 4 pieces, and adjustable the effective height by liner block. - E
This ANRITSU Model X-RAY Inspection Machine is designed especially for Pharmaceutical Products. Detection Area Maximum Width: 100 mm Maximum Height: 30 mm Speed: 10-40/ meters min Maximum: 0.5kg Pdf attached
Aperture Size: 250 W x 120 H mm Belt Dimensions: 1,500 L x 200 W x 860 H mm Painted Construction Stainless Steel Frame Sew Motor + Gearbox Calibration Date: 13/03/18 Power: 3-Phase, 415V, 50Hz, 10Amp 0.25kW
The KD7305ABW is used to detect contaminants in products, such as meat, fish, etc., when X-ray leakage prevention curtains cannot be used. Features: 1. Short length (1570 mm) 2. Less than 1 µSv/h X-ray leakage (without X-ray leakage prevention curtains) 3. IP66-compliant conveyor 4. 50-mm detection height and 240-mm detection width (KD7305ABW)
The KD7305ABW is used to detect contaminants in unpackaged bulk products, such as meat, fish, etc., when X-ray leakage prevention curtains cannot be used. Features: 1. Short length (1570 mm) 2. Less than 1 µSv/h X-ray leakage (without X-ray leakage prevention curtains) 3. IP66-compliant conveyor 4. 50-mm detection height and 240-mm detection width (KD7305ABW)
Product Weight: 5 kg Max (50 m/min) Prod Size: 240 mm W x 30 mm H Temp: 0 deg C - 35 deg C
Anritsu X-ray foreign body detection machine for the detection of products mixed with small foreign objects, such as metal, sand, stone, shell, glass, pearls and high-density plastic . 15-inch color touch screen for customers of the simple operation of the screen, with the production of sensitivity adjustment and automatic tracking function, the new information management and maintenance functions
Technical Specifications : Pipe Diameter: 75mm ID Single Phase, 220V, 50Hz Touch screen panel control All s/s mobile on trolley
<Specifications> Product Weight: Max 5Kg Aperture Size:100mm H x 350mm W Temperature: 0 - 40 Degrees C
PROUDLY AUSTRALIAN MADE! This vertical fall or drop through metal detector is commonly used on Form Fill and Seal machines, mounted just above the forming tube, or in other applications for gravity fed free flowing powders, pipeline, liquid or granular materials. SPECIFICATIONS : Detector Head weight: 200mm unit is 28kg Detection Sensitivity at Phase Out: 200mm unit is 1.6mm mild steel & 2.
PROUDLY AUSTRALIAN MADE! This vertical fall or drop through metal detector is commonly used on Form Fill and Seal machines, mounted just above the forming tube, or in other applications for gravity fed free flowing powders, pipeline, liquid or granular materials. These drop-through metal detectors are suitable for dry products, and not intended for fresh products and wet environment. SPECIF
PROUDLY AUSTRALIAN MADE! This vertical fall or drop through metal detector is commonly used on Form Fill and Seal machines, mounted just above the forming tube, or in other applications for gravity fed free flowing powders, pipeline, liquid or granular materials. These drop-through metal detectors are suitable for dry products, and not intended for fresh products and wet environment. SPECIF
Metal Detector is fitted on a frame with hooks for bulk bag stand <Specifications> Aperture Size: 150mm Diameter Frequency: 138 KHz XTL No.: 4.43