|This pasta extruder was part of a pilot plant producing soya products. It has a high shear screw so it is quite flexible for formed and cooked products.
The machine basically consists of a primary double shafted blender/mixer mounted at the upper level which discharges through a transverse pipe screw to the extruder entry point.
After passing through the extruder, the final product exits the die at a low moisture of 12 to 14% and can be cut easily into the required size and shape.
These shapes are further dried and milled to 20 mesh consistency through the final sections of the machine. Extruder size is 95mm ID x 1180mm L s/s screw.
The extruder is powered by a dual speed 440 - 1,750RPM, 5,5 - 22KW, 3 Phase, 415V, TEFC Electric motor belt coupled to the shaft.
The extruder barrel is steam jacketed to provide the heat for cooking of the product. Cutter section also available as well as conditioner.
Extruder Barrel Overall Length - 1180mm
Extruder Barrel Internal Dia - 95mm
Footprint - Length 2450mm : Width 1320mm
Height - 1460mm
Basic construction of the machine is of mild steel.
Draws 91 Amps of power (if all 9 motors are going + 2 heaters as well).
|Model:||TCDS 65609 TPLE 7415 Special HB250 GG-65682|
|Size/Capacity:||Approximately 140 Kg/hr of cereal type product
|Serial Number:||1008 3315|
The P35A is a new pasta machine suitable for pasta shops, restaurants, hotels, bakeries, big communities and supermarkets; its visual appeal ensures a ...
This good used automatic dumpling filler and former was used in a Japanese food factory to make dumplings similar to Paozu. Output: 5,000 pieces/hr - ...
The vacuum de-aerator is suited for the de-aeration of liquid up to paste-like products, that have not been manufactured under vacuum and therefore contain ...
This egg-breaker/separator is a small mobile machine, and can be pushed to any station or processing point where needed. Eggs are placed either manually ...