Anritsu X-Ray Inspection Machine KD7305ABW
X-ray Inspection System
This X-ray Inspection System uses low-energy X-rays to rapidly detect contaminants in foods and sends a rejection signal to a rejector. In addition, it can also detect missing products in packed foods.
Detectable contaminants
Metal, glass, stone, hard bone, natural rubber, high-density plastics However, it may not detectable depending
n physical properties of checked products.
Non-detectable contaminants
Hair, bugs, cartilage, wood, paper, textiles, low-density plastics
Principles of Detection
A narrow beam of X-rays radiated from an X-ray tube is radiated through the products carried on a conveyor to an X-ray detector. The X-ray beam passes through the products and its power is measured by an X-ray detector installed under the conveyor.
The level of the X-rays is low when there is a product on the conveyor and high when there is no product on the conveyor. When a contaminant is present in a product, the level of the X-rays is lower than the level of an uncontaminated product. When there is a missing product, the level is higher than when there is a product.
Features
1. This inspection system can detect contaminants in packaged products as well as in aluminum retort pouches, aluminum sealed containers and aluminum cans.
2. SUS304 with a diameter of more than 0.5 mm can be detected.
3. This inspection system detects contaminants with the belt speed of 90 m/minute.
4. The contaminant position can be confirmed on an inspection screen.
5. Missing products can also be detected simultaneously with contaminants.
The KD7305ABW is used to detect contaminants in unpackaged bulk products, such as meat, fish, etc., when X-ray leakage prevention curtains cannot be used.
Features:
1. Short length (1570 mm)
2. Less than 1 µSv/h X-ray leakage (without X-ray leakage prevention curtains)
3. IP66-compliant conveyor
4. 50-mm detection height and 240-mm detection width (KD7305ABW)
Product weight: Max 5kg (50m/min)
Prod size: Max 240mm W x 50mm H
Weight: 250kg
Dimensions with air con (catalog): 1430mm W x 960mm D x 1410m mH
Mass with aircon: 270kg
Belt speed: 5-50m/min
X-ray leakage: 1 μSv/h max.
X-ray Output:
- Tube voltage: 60 kV max.,
- Tube current: 7 mA max.,
- Maximum output: 210 W
Operation panel: 15-inch color LCD touch panel
Protection class (IEC529): IP66 (conveyor), IPX3 (main unit)
Environment: Ambient environment: 0° to 35°C (0° to 40°C with air conditioner), Relative humidity: 30 to 85%, No condensation (30 to 95% with air conditioner)
Power: 1ph, 240V, 50Hz, 1kVA (1.6kVA with aircon)
Belt width: 270mm
|
Model
|
KD7305ABW
|
|
Overall dimensions
|
Length: 1600 mm Width: 1050 mm Height: 1550 mm
|
|
Stock number
|
METD20117S
|
|
Serial number
|
4600023585
|
|
Condition
|
Used
|
Resources
Fully serviced
Production ready
Backed by warranty
We supply our used machinery fully serviced, production ready and backed by warranty. This is included in our initial quotation.
check_circle Meticulous 97-point inspection
Every piece of equipment is put under a demanding inspection before delivery. Our inspection covers mechanical, electrical, pneumatic, and cosmetic checkpoints.
check_circle Fully serviced
The unit is fully serviced to meet high mechanical, electrical, pneumatic, and cosmetic standards. Missing or damaged components are repaired or replaced.
check_circle Warranty
Used machinery is backed by a standard 3-month warranty.
Terms and Conditions:
-
Warranty includes mechanical and electrical parts, but excludes electronic parts (for example, touch screens, servo drives and PLCs).
check_circle Australian safety standards compliant
Our machinery is delivered compliant with the Australian AS 4024 Safety of Machinery Standards. Our engineering team is experienced in assessing machine safety and bringing machinery in line with AS 4024 by installing guards, ergonomic features and safety features like emergency stop controls.
done Comprehensive safety assessment
done Guards
done Ergonomic features
done Safety features
done Safety risk assessment document
check_circle Australian electrical standards compliant
Our machinery is delivered fully compliant with AS/NZS 3000 electrical standards.
check_circle Trial run your product in our engineering shop
Provide your product and our engineers will conduct a free trial run of your product. You can either be present, or we can send you video of the trial.
Terms and Conditions:
-
While this trial run is free of charge, any modifications or change parts are billable.
-
Trial runs must be booked in advance.
check_circle Trial a machine for 2 weeks in your plant
You are welcome to trial a machine in your plant for 2 weeks (you will be required to pay for transport of the machine and a refundable holding deposit).
Terms and Conditions:
-
Trial of machinery is subject to Process Plant Network confirming the machine is suitable for your product.
check_circle Free training in our engineering shop
check_circle Rent to buy options
- Get your product to market with minimal upfront investment.
- Pay off the machinery with the revenue it generates.
- Rentals are 100% tax deductible and not listed as an asset on your company’s asset register.
- Minimise risk. It’s no secret that new product failure rates in the grocery sector are extremely high. With Rent to Buy, companies will not be left with paying off idle machinery assets if a project proves to be unsuccessful.
How it works:
- Available for single machines or complete turnkey systems
- Start producing immediately with a small down-payment of 2 months rental
- 6 to 18 month rental periods available
At the end of the rental period:
- Buy the machine outright, deducting 50% of the rental you’ve already paid from the price of the machinery; or,
- Keep renting the machinery; or,
- Return the machinery with no more to pay.
Free comprehensive summary quote including scale engineering drawing
Factory acceptance testing
See your machinery running your product and/or packaging in our shop before it is delivered to your plant. You can be confident your machinery will be production ready after installation.
Complete line running in our engineering shop
This allows you to see your system running and make those final critical changes that often make all the difference.
We commission your system plug-n-play, production ready
Our engineers are able to design your system to fit the floorplan of your plant, then build, configure and test it in our shop before delivering it plug-n-play on arrival.
Training
Our engineers can train your staff in our shop, or we can arrange on-site commissioning and training (at additional cost).
Engineering and Integration Services
-
Complete turnkey process, packaging and end of line solutions
-
Automation and robotics
-
Robotic pick and place, palletisers and cells
-
PLC programming and motion control
-
Scope development, concept development and proof of concept
-
Project planning and management
-
Full engineering drawings, wiring diagrams and line controls
-
Complete trial runs
-
Factory acceptance testing (FAT)
-
On-site commissioning and training
-
Modification or upgrade of existing line
-
Retrofitting, customisation and custom change parts
-
Configure and set to size
-
Safety wiring and interlocks to Category 4
-
Guarding and ergonomic and safety features
-
Safety risk assessments and documentation
-
Servicing machinery
Rent to Buy
- Get your product to market with minimal upfront investment.
- Pay off the machinery with the revenue it generates.
- Rentals are 100% tax deductible and not listed as an asset on your company’s asset register.
- Minimise risk. It’s no secret that new product failure rates in the grocery sector are extremely high. With Rent to Buy, companies will not be left with paying off idle machinery assets if a project proves to be unsuccessful.
How it works:
- Available for single machines or complete turnkey systems
- Start producing immediately with a small down-payment of 2 months rental
- 6 to 18 month rental periods available
At the end of the rental period:
- Buy the machine outright, deducting 50% of the rental you’ve already paid from the price of the machinery; or,
- Keep renting the machinery; or,
- Return the machinery with no more to pay.
We provide export crating, container loading and overseas freight services at additional cost.
For loose container load (LCL), we arrange an export crate using treated wood according to the machine size (to protect the machine from damage during transport) and crate the machine at our warehouse.
For full container load (FCL), we bring the empty container, load the equipment, and lash/secure them inside the container at our warehouse. We can then arrange either seafreight or airfreight to the customer's nominated destination sea/airports.
We usually arrange on the CFR (Cost and Freight) basis as per Incoterms.
Marine insurance, applicable local duties/taxes, custom clearance and delivery to customer's site in their destination country are to the customer's account.
We regularly provide this service for customers in New Zealand, the United Kingdom, the USA and Asia.
