Machinery - Metal Detectors - Process Plant Network

Anritsu KD series metal detector Indicator Model: KD3001AW Serial: K122100 Detector head Model: KD1013AW Serial: K122877 Aperture: 300mm W X 72mm H X 170mm deep Belt dims:220mm W X 800mm L Current working height: 880mm Tested on 10/4/24 Dry Bread Crumbs Fe: 1.0mm Non Fe: 1mm SUS: 1.5mm Disclaimer: All speeds, capacities and sensitivities are product and application dependent.

Loma Drop Through Metal Detector IQ2

Drop Through metal Detector Previously a part of Carlson Blending state. Unit is mobile on lockable castors Make: LOMA Model: IQ2 Serial Number: C600049 Frame height: 1440mm Hanger hooks: 1540mm Discharge height: 1400 (1273 with tube insert) Infeed height: 1644mm ( 1690 mm with tube insert) Frame dimensions: 1490mm X 1325mm X 1440mm H

Anritsu Metal Detector KD8113A

Anritsu Metal Detector with Reject Bin Metal detector that supports safety and secure in the food business The duw series, which adopt the industry’s first simultaneous 2-frequency magnetic field detecting method, dual wave, are provided with our unique sensing technology such as auto setting algorithm and tracking functions. Enhanced sensitivity both to ferrous and non-ferrous metals achieves s

Anritsu Metal Detector KD8113BF

Anritsu Metal Detector with Reject Bin Indicator: KD3103AW Detector: KD1113BW SN: 4600101862 Product Weight: Max 5 Kg Product Size: 250 W x 80 H mm Electrics: 1ph, 240V, 50Hz Direction: Right to Left Aperture: 300mm W X 83mm H X 207mm deep Working height : 820mm Detection belt: 220mm W X 780mm C2C Reject Belt: 250mm W X 665mm C2C Reject type: swing arm into a locked bin Tested on 15/4/24 Bread

Loma Drop Through Metal Detector IQ2

Loma IQ2 drop through metal detector with reject and bulk bag chute arm Serial No: 20789 Metal detector ID: 173mm Non metallic Insert chute: 132mm ID, 915mm tall Total length (indeed to Discharge): 1100mm Reject mechanism made by heat and control Model: MD Cowbell Serial: 110788 16/8/00 -Was part of FILL23228S Bulk Bag Filling System

DETEC Metal Detector 4B-QDF

The QDF is a high-performance Metal Detector suitable for detecting ferrous and Nor-ferrous metallic contamination in a wide range of food or other products. The QDF consists of an Aluminium constructed detecting head with full surround triple coil system filled with a Non-shrink Urethane resin for complete sealing. The system operates using analog main controls with digital pulse phase modulation

System Square Inc Metal Detector SD6035WH-D4

Mobile metal detector on castors System square controller Waterproof head Direction Left to Right Aperture Size: 600 W x 350 H mm x 295mm deep Conveyor Size: 1,400 L (C2C) x 500 W mm Sensitivity: 1.2mm Fe and 2.0mm SUS Belt speed: 24m/50Hz Working height: 600mm off ground Electrics: 1ph, 220V, 50Hz Ishida Model: ISD-6035-WP Job No: 04/ 16126 Serial: 62356 DOM: 03/2005 Operators manual supp

Anritsu Metal Detector KD803BDW

- Automatically adjusts sensitivity just by passing a product several times. - Dry/Wet Switching function fitted to a wide range of products. - 50 preset memories for small volume multiple production line Product Weight: Max 50 Kg Product Size: 550 W x 250 H mm

AND Metal Detector AD-4971-3510

Compact AND Metal Detector Aperture Size: 350 W x 100 H mm Effective Size: 250 W x 80 H mm Conveyor Length: 800 mm Conveyor width: 250mm Conveyor Belt Speed: 10-60 m/min Current working height: 670mm ( without feet) Working height can be adjusted using the threaded feet. Water Resistance: IP65 Compliant Electrics: 1ph, 220V, 50Hz

Mettler Toledo Metal Detector with Reject Profile (Safeline)

Low profile metal detector with reject. The rejected product is collected in a bin accessible from the side. The machine is mobile on castors Power Supply: 3~, 415V, 50Hz Intralox Belt Belt width: 680mm Belt length: 145mm (120mm detection + 25mm reject) Head Unit: Electrics: 100-240VAC , 50/60Hz, 340W max Aperture: 800mm x 80mm (without belt)

Anritsu Metal Detector KD8113A

Metal detector that supports safety and secure in the food business The duw series, which adopt the industry’s first simultaneous 2-frequency magnetic field detecting method, dual wave, are provided with our unique sensing technology such as auto setting algorithm and tracking functions. Enhanced sensitivity both to ferrous and non-ferrous metals achieves stable detection performance. Features:

Fortress Drop-Through Metal Detector Stealth

Stealth Gravity Metal Detector Stealth Gravity Metal Detectors are designed to inspect a wide range of products in free-falling applications. This unit is fitted with mounting stand. Applications Flour Rice Cereals Powders/Grain Corn Sugar Plastics Chemicals Nuts Confectionery Aperture 215mm internal diameter 200mm deep Painted body with separate head display with controls. Head unit dimensi

Safeline Metal Detector Head Only

Features: Includes control box that houses all the wiring Make: Mettler Toledo Model: Safeline Metal detection Aperture: 350mm L x 170mm H x 330mm deep Electrics: 100-240VAC, 50/60Hz, 340W max. Head only dimensions: 900mm L x 350mm W x 450mm H

Thermo Fisher Scientific X-Ray Inspection Machine EZX 420

The Thermo Scientific EZx is a conveyorized X-ray system designed to look and work more like a metal detector than a complex X-ray system. It utilizes a unique wrap around detector that assures there are never any “blind spots” in the inspection tunnel. The exceptionally reliable, wide beam X-ray source can easily penetrate most packaged foods without any trouble. The EZx contaminant detection sys

Anritsu Metal Detector KD8013NWT

Anritsu vertical model is suitable for tall products in containers, such as beverages and seasonings in glass and plastic bottles. - Max Product Weight: 5Kg - Product Size: 80 W x 280 H mm - Temp: 0-40 degree Celsius - Power: 100 VAC-240VAC - 1~ 1510VA 50/60Hz - Aperture: 100mm W x 280mm H x 170mm deep - Rejecter type: High pressure pneumatic blower - VSD for speed control: Keyence Hyb

Lock Free Fall Inline Metal Detector Met 30+

Aperture Size: 9.5 inch Dia x 800mm Long - Single phase digital controls, - Stainless steel frame, - Complete with an electro pneumatic rejection station Sensitivity as per results from test in-house: 1.5mm Ferrous, 2mm Non-Ferrous and 2mm Stainless Steel - Manual available

Thermo Scientific Metal Detector with Reject DSP IP Plus

Aperture size; 350 mm wide, 650 mm high. SCADA protocols Modbus RTU via RS-485, and an RS-232 interface. Scanning speed range from 1 m/min (3.1 ft/min) up to a maximum of 350 m/min (1000 ft/min) (dependent on configuration). Note: They are pulled apart and need to be reassembled. Metal Detector Unit Full Stainless Steel Construction on 4 hard stand Dimensions: 370mm (L) x 700mm (W)

Nikka Metal Detector MP2-250B

Stainless steel frame with emergency stop button and bell alarm. Electrics: 1~, 240VAC, 50hz, 3 pin plug Metal Detector: - S/N: 21272 - CAP: 100VA - Input: 100V, 1~ - TYP: MP2-400A - Detector Unit: B250 , S/N 318 Detection Coil: - B type - Opposing type - High frequency type - Best for dry product - Splt-off to 4 pieces, and adjustable the effective height by liner block. - E

Anritsu X-Ray Inspection Machine KD7490LYN

This ANRITSU Model X-RAY Inspection Machine is designed especially for Pharmaceutical Products. Detection Area Maximum Width: 100 mm Maximum Height: 30 mm Speed: 10-40/ meters min Maximum: 0.5kg Pdf attached

Safeline Belt Type Metal Detector SIG 250 150

Aperture Size: 250 W x 120 H mm Belt Dimensions: 1,500 L x 200 W x 860 H mm Painted Construction Stainless Steel Frame Sew Motor + Gearbox Calibration Date: 13/03/18 Power: 3-Phase, 415V, 50Hz, 10Amp 0.25kW Disclaimer: All speeds, capacities and sensitivities are product and application dependent.

Anritsu X-Ray Inspection Machine KD7305AW

This X-ray Inspection System uses low-energy X-rays to rapidly detect contaminants in foods and sends a rejection signal to a rejector. In addition, it can also detect missing products in packed foods. Detectable contaminants Metal, glass, stone, hard bone, natural rubber, high-density plastics However, it may not detectable depending n physical properties of checked products. Non-detectable c

Anritsu X-Ray Inspection Machine KD7305ABW

The KD7305ABW is used to detect contaminants in products, such as meat, fish, etc., when X-ray leakage prevention curtains cannot be used. Features: 1. Short length (1570 mm) 2. Less than 1 µSv/h X-ray leakage (without X-ray leakage prevention curtains) 3. IP66-compliant conveyor 4. 50-mm detection height and 240-mm detection width (KD7305ABW)

Anritsu X-Ray Inspection Machine KD7305ABW

X-ray Inspection System This X-ray Inspection System uses low-energy X-rays to rapidly detect contaminants in foods and sends a rejection signal to a rejector. In addition, it can also detect missing products in packed foods. Detectable contaminants Metal, glass, stone, hard bone, natural rubber, high-density plastics However, it may not detectable depending n physical properties of checked pr

Ishida X-Ray Inspection Machine IX-G-2450

X-Ray Tube Voltage: 25/30/35/40/45/50 kV X-Ray Tube Current:: 1 to 5.0mA X-Ray Output:: Maximum 150 W X-Ray Emission: 1 μSv / h or Less, Including Conveyor Inlet/Outlet The Shape of Object to be Detected: Packaging or No Packaging Detection Area: 20 - 450 L x Max 240 W x Max 120 H mm Power Supply: 240V, 50 / 60Hz +/- 10% Protection Class: IP65 (Transmission Unit: IP66) Operating Te

Anritsu X-Ray Inspection Machine KD7405A CWH

Product Weight: 5 kg Max (50 m/min) Prod Size: 240 mm W x 30 mm H Temp: 0 deg C - 35 deg C

Anritsu X-Ray Inspection System KD7478AW

Anritsu X-ray foreign body detection machine for the detection of products mixed with small foreign objects, such as metal, sand, stone, shell, glass, pearls and high-density plastic . 15-inch color touch screen for customers of the simple operation of the screen, with the production of sensitivity adjustment and automatic tracking function, the new information management and maintenance functions

Ishida X-Ray Inspection System IX-G-4075

The Ishida IX Series is a system for detecting foreign objects intermixed in food and other products by X-raying ... Details to follow. Job No.: 07/16387

GORING KERR Pipeline Metal Detector DSP 2

Principle of Operation Three equally spaced coils surround the aperture or opening through which the product to be inspected passes. The center coil is connected to an oscillator circuit to produce an electromagnetic field. This signal is received by two coils one on either side of the oscillator coil. These are the receiving or input coils. Since the receiving coils are equally spaced from the

Anritsu Metal Detector KD802A

Indicator: KD301A SN: K094434 Detection Head: KD102A SN: K104484 <Specifications> Product Weight: Max 5Kg Aperture Size:100mm H x 350mm W Temperature: 0 - 40 Degrees C Maximum pass width: 300mm Belt width: 220mm Max passing height: 80mm Belt speed: 39m/min Power: 1ph, 240V, 50Hz, 200VA Mass: 70kg Metal detection: Belt stop and alarm, Reject (if installed) Sensitivity: FE: 0.4mm, SUS304:0.7mm H

ABM Metal Detectors Metal Detector (Drop-Through) with 4 mtrs cable remote VF-200

PROUDLY AUSTRALIAN MADE! This vertical fall or drop through metal detector is commonly used on Form Fill and Seal machines, mounted just above the forming tube, or in other applications for gravity fed free flowing powders, pipeline, liquid or granular materials. SPECIFICATIONS : Detector Head weight: 200mm unit is 28kg Detection Sensitivity at Phase Out: 200mm unit is 1.6mm mild steel & 2.

ABM Metal Detectors Metal Detector (Drop-Through) with 4 mtrs cable remote VF-150

PROUDLY AUSTRALIAN MADE! This vertical fall or drop through metal detector is commonly used on Form Fill and Seal machines, mounted just above the forming tube, or in other applications for gravity fed free flowing powders, pipeline, liquid or granular materials. These drop-through metal detectors are suitable for dry products, and not intended for fresh products and wet environment. SPECIF

ABM Metal Detectors Metal Detector (Drop-Through) with 4 mtrs cable remote VF-100

PROUDLY AUSTRALIAN MADE! This vertical fall or drop through metal detector is commonly used on Form Fill and Seal machines, mounted just above the forming tube, or in other applications for gravity fed free flowing powders, pipeline, liquid or granular materials. These drop-through metal detectors are suitable for dry products, and not intended for fresh products and wet environment. SPECIF

ABM Metal Detectors Drop-Through Metal Detector VF-150

Metal Detector is fitted on a frame with hooks for bulk bag stand <Specifications> Aperture Size: 150mm Diameter Frequency: 138 KHz XTL No.: 4.43

Metal Detectors

Processing Machinery

Packaging Machinery

Materials Handling

ISO 9001 Certified Company

Websites

Process Plant Network Pty Ltd

Email

Telephone

Showroom